0bx07astmiln9be1xn0hbwlv5ehm Access

(Software Defined Radio)
0Bx07AStmiLN9bE1xN0hBWlV5eHM

Summary
With A Good USB TV Dongle (For 10$ Or 30$) You Can Scan, Listen... Radio Frequencies !
FM, AM, NFM, GSM... | Satellites, Planes, Boats, Trains, Cars, Pagers, Taxis...

(USB Dongle It's One Thing, The Antennas Another)

(You Have Some Links And Quick Start Guides Below...)


The video
Here, A Video To Show How To Use And Some Basic Uses (In 2014 / 2015)
(Sorry, In This Video, I Dont Use The "Squelch" Option In "SDR#")
(If You Want Avoid Undesirable Noises Between 2 Transmissions, Check/Adjust "Squelch")



Miscellaneous SDR Links
(If URL [or webiste] Seems Down, Try The "WayBack Machine" => https://web.archive.org/)

("xdeco.org" And "rtl-sdr.ru" Websites Seems Down)


Quick Start Guide:
A Fast Installation On Linux (Debian/Ubuntu)
  1. Buy A Compatible SDR USB Dongle (Based On The Realtek RTL2832U)
    [Compatible Tuners: E4000, R820T, R820T2, R828D, FC0013, FC0012, FC2580, ...]
    See Compatible Tuners/Dongles: https://osmocom.org/projects/rtl-sdr/wiki/Rtl-sdr

  2. Open A Shell And Install SDR Tools (Here Only "rtlsdr", "gqrx" And "cubicsdr") With This Commands :
    #> apt-get update
    #> apt-get install rtl-sdr librtlsdr-dev gqrx-sdr cubicsdr

  3. Blacklist Module(s) :
    - Edit The "/etc/modprobe.d/blacklist.conf" File (Here With "Vim" But You Can Use Any Editor) :
    #> vim /etc/modprobe.d/blacklist.conf
    - Add At The End Of File This Lines (You Can Add Others If You Want) :
    blacklist rtl8xxxu
    blacklist dvb_usb_rtl28xxu
    blacklist dvb_usb_v2
    blacklist rtl_2830
    blacklist rtl_2832
    blacklist r820t
    - Save And Close "/etc/modprobe.d/blacklist.conf" File
    - Reboot PC

  4. After Reboot, (If Unplugged) Plug Your SDR USB Dongle
    To Watch Your SDR USB Dongle, enter command :
    #> lsusb | grep -i rtl
    [ OR ]
    #> dmesg
    [ OR ]
    #> dmesg | grep -i rtl

  5. And Just Start "gqrx" (From A Shell Or Menu)
    [If You Want Reset "gqrx" Configuration, Run This Command On A Shell "gqrx -r"]

  6. If You Prefer, Instead Of "gqrx", You Can Also Start "cubicsdr"...

  7. For More..., Install GNURadio:
    #> apt-get install gnuradio gnuradio-dev

Quick Start Guide:
A Good Installation On Windows

The ID is a unique identifier typically associated with a file stored on Google Drive . Understanding Google Drive File IDs

If you have been given this ID and need to access the content, you can generally do so by appending it to the standard Google Drive URL prefix. However, if you do not have permission from the owner, you will see an "Access Denied" or "Request Access" screen.

These IDs are usually found within a URL, following the format: ://google.com[FILE_ID]/view .

Every file and folder on Google Drive is assigned a specific Resource ID. This string of characters serves as the "fingerprint" for the file, allowing it to be shared or accessed via a direct link.

Get Your SDR USB Dongle "Frequency Correction (ppm)" (2 Methods)
(Every SDR USB Dongle Has It's Own "Frequency Correction (ppm)" Value)

0bx07astmiln9be1xn0hbwlv5ehm Access

The ID is a unique identifier typically associated with a file stored on Google Drive . Understanding Google Drive File IDs

If you have been given this ID and need to access the content, you can generally do so by appending it to the standard Google Drive URL prefix. However, if you do not have permission from the owner, you will see an "Access Denied" or "Request Access" screen.

These IDs are usually found within a URL, following the format: ://google.com[FILE_ID]/view .

Every file and folder on Google Drive is assigned a specific Resource ID. This string of characters serves as the "fingerprint" for the file, allowing it to be shared or accessed via a direct link.

Listen FM Radio (From A Linux Shell) (2 Methods)
  1. (If Unplugged) Plug Your SDR USB Dongle

  2. (If Not Installed), Install Packages:
    [ "rtl-sdr" For "rtl_fm" command, "sox" For "play" command, "alsa-utils" For "aplay" command ]
    #> apt-get install rtl-sdr sox alsa-utils

  3. Method 1: Run Command (Output Audio With "play"):
    [ Replace "-f 99.6M" By A FM Radio Frequency, And "-p 51" By Your PPM Correction ]
    #> rtl_fm -f 99.6M -M wbfm -s 200000 -r 44100 -p 51 | play -t raw -r 44100 -es -b 16 -c 1 -V1 -

  4. Method 2: Run Command (Output Audio With "aplay"):
    [ Replace "-f 99.6M" By A FM Radio Frequency, And "-p 51" By Your PPM Correction ]
    #> rtl_fm -f 99.6M -M wbfm -s 200000 -r 44100 -p 51 | aplay -r 44100 -f S16_LE -t raw -c 1