26524x

Carefully pull the old hose off. If it's stuck, you can gently twist it or use a hose removal tool. Avoid prying against plastic radiator necks to prevent cracking. 3. Installation Guide

Wipe the radiator and engine ports to ensure a clean seal. Position Clamps: Slide the clamps onto the new hose before installing it. 26524x

Leave the radiator cap off and start the engine. Let it reach operating temperature until the thermostat opens. This allows air bubbles to escape. Carefully pull the old hose off

Pliers (for hose clamps), a drain pan, and fresh coolant compatible with your vehicle (e.g., Toyota Pink/Super Long Life). Leave the radiator cap off and start the engine

This hose is designed to meet SAE J20R4 Class D-1 standards , meaning it resists bursting and extreme temperatures from -40°F to 257°F. 2. Removal Guide

Inspect both ends of the new hose for any signs of weeping or dripping.

Place a drain pan under the radiator. Open the drain petcock (usually at the bottom of the radiator) to empty the coolant. Locate the Hose: The