: Clean unpainted surfaces (like the table) with a cloth moistened with kerosene to remove protective coatings. Table Assembly :
Maintain a minimum clearance of between the table and the sanding belt for safety. Delta 52 611 Sander Manual
Slide the table assembly onto the rod and secure it with the secondary socket head screw. : Clean unpainted surfaces (like the table) with
: Use a 3-wire grounded extension cord. Ensure the gauge is heavy enough to prevent voltage drops and overheating (refer to the Delta Abrasive Belt Manual for specific gauge charts). 3. Operational Safety 6" Abrasive Belt Finishing Machine : Use a 3-wire grounded extension cord
: Must be secured to a workbench or floor; if using a workbench, drill four 3/8-inch holes to permanently bolt the base. 2. Setup and Installation
: Overall height of 60", weighing roughly 200 lbs.