Open a command window in the tool’s folder and run: python main.py . The tool will display "Waiting for bootrom". : Power off your phone.
Install required libraries by opening a command prompt and typing: pip install pyusb json5 . Descargar MTKAuth Bypass ToolV30 Firmware4mobile com rar
Install (64-bit) or use libusb-win32 to install a device filter for the MediaTek USB port. Run the Utility : Open a command window in the tool’s folder
Hold the , Volume Down , or both buttons (depending on the model) and connect it to the PC. If successful, the tool will say "Protection disabled" . Flash Firmware : Keep the phone connected. Install required libraries by opening a command prompt
To successfully use the tool on Windows, follow these standard steps derived from the Hovatek community and GitHub sources : :
Open , go to "Options" > "Connection," select UART , and choose the corresponding COM port. You can now proceed to flash your firmware as usual. Key Considerations