Gost 6793 -

Lubricating greases are engineered by combining a base oil with a thickener and performance additives. The thickener holds the oil like a sponge. As grease is heated, it reaches a temperature where the thickener can no longer retain the oil.

Formulated under GOST 1033-79, these are intended for low-temperature applications up to about 65 °C. Their dropping points typically register on the lower end, around 75 °C to 100 °C. gost 6793

If you are working with equipment or grease specified under non-CIS metrics, the procedure outlined in GOST 6793 is highly comparable to the following international standards: or ASTM D2265 (United States) ISO 2176 (International Organization for Standardization) DIN 51801 (Germany) Lubricating greases are engineered by combining a base

Note: While identical in premise, subtle variations in heating rates or cup dimensions between these standards can result in slight numerical differences in the final recorded temperature. Formulated under GOST 1033-79, these are intended for

The standard outlining the procedure is officially recognized as . Testing typically follows these specific parameters:

Complex or polyurea greases intended for extreme operating environments will feature dropping points clearing 230 °C to 250 °C. 🌍 International Equivalents