: Plug your receiver outputs into the left side of the board. Follow the pin definitions for Aileron, Elevator, Throttle, and Rudder.
: Move the throttle to zero and the rudder stick to the far left. kk2.jpg
: Use the on-board "PI Editor" to adjust the gain settings if your drone feels shaky or sluggish. Beginners can often start with the default firmware settings provided by DroneTrest. KK2.1 Flight Controller Guide - Guides : Plug your receiver outputs into the left side of the board
Based on the file reference "kk2.jpg," this guide covers the , a popular and budget-friendly board used for building DIY quadcopters. This controller is unique because it features a built-in LCD screen and buttons, allowing you to configure your drone without needing a computer. 1. Hardware Assembly : Use the on-board "PI Editor" to adjust
: Place the flight controller (FC) on your frame with the LCD facing the front of the craft and the buttons toward the back.