The filename n_031.mp4 frequently appears in technical contexts related to crane systems, specifically associated with documentation for the DS 350 and EI 65 series Load Moment Indicators (LMI).
Before completing the assembly, verify these digital inputs: n_031.mp4
: Measure the signal between Pin 2 (signal) and Pin 1 (ground). Use a voltmeter at test point MP4 on the main board. 2. Angle Sensor Adjustment The filename n_031
: Remove old wires from the terminal block and connect the new assembly. n_031.mp4
: Lower the boom completely to remove rest pressure. Disconnect hydraulic hoses.
: Verify voltage at the sensor. Expected values are roughly 3.125V (0°) and 2.5V (45°) . 3. Pressure Transducer Maintenance
