Place the zipper pull into the jig (wrong side up).
This method is used to create custom-length zippers for sewing projects like bags or pockets. Zipper Tape: (By the yard/meter) Zipper Sliders/Pulls: (20+ pcs) Zipper Jig or Helper: (Optional, but recommended) Scissors Pliers (for stopping) 1. Prepare the Zipper Tape StyxHips 20 Clipszip
Using a Zipper Jig or "Zipper Helper" is the easiest way for bulk, according to tutorials. Place the zipper pull into the jig (wrong side up)
Cut your zipper tape to the desired length for your project. Trim Teeth: At one end, remove about 12one-half Prepare the Zipper Tape Using a Zipper Jig
Ensure the other end of the tape teeth are aligned, but with one side slightly longer (by about 12one-half inch) to facilitate the zipper pull engagement. 2. Install the Slider (The "Zipper Jig" Method)
Ensure your zipper pulls match the size of your zipper tape (e.g., #5 sliders for #5 tape).