This guide summarizes the core steps for installing the repair kit to fix common issues like "flaring," slipping, or gear ratio codes.
Remove the solenoid brackets, solenoids, and the small/large cover plates. 2. Inspecting Critical Wear Areas U76Ezip
Remove the counter gear/turbine speed sensor and disconnect the case connector from all seven solenoids. This guide summarizes the core steps for installing
While the valve body is in the transmission, remove the 11 indicated bolts and the internal wire harness assembly. corrected hydraulic pressures.
Issues here can lead to burned clutches or slipping in 2nd and 6th gears. 3. Installation of Kit Parts
Replace original components with the specific Sonnax parts provided in the kit. The kit typically includes O-rings, springs, and improved valves to restore hydraulic pressure.
After installation, you must perform a TCM Initialization/Memory Reset to allow the transmission computer to adapt to the new, corrected hydraulic pressures.