Vd-tgm0001.rar Apr 2026

: If the parts were resin printed, ensure they are fully cured and washed. If they are physical resin cast parts, wash them in warm soapy water to remove mold release agents.

: Most VD-TGM models use a "peg and hole" system. Test each connection before applying glue. VD-TGM0001.rar

: Extract the .rar file and compare the parts to the "Parts List" image (usually included as a JPG or PNG in the folder). : If the parts were resin printed, ensure

: For heavy parts (like a large cape or an outstretched arm), drill a small hole in both pieces and insert a trimmed paperclip or brass wire to act as a structural "skeleton" before gluing. 5. Gap Filling Test each connection before applying glue

: If a thin part (like hair or a sword) is warped, dip it in hot water for 20 seconds, gently bend it into the correct shape, and hold it under cold water to set. 3. Assembly Sequence For complex figurines, follow this order:

: Attach legs to the base (if applicable) and then the arms to the torso.